A fine cloud around a sprinkler can indicate excessive pressure, but a clogged or damaged nozzle can also distort the pattern. Compare nearby heads and check the nozzle before assuming the entire system needs a pressure regulator.
Sprinkler Master Repair (South Valley) • South Salt Lake County, UT
Is one nozzle distorted or is the whole zone fogging?
Observe a brief cycle in calm weather. Note whether only one outlet looks wrong or similar heads across the zone produce a fine mist. Wind can carry droplets away; the important observation is the pattern leaving the nozzle.
Clean and inspect before choosing replacement parts
With the zone off, check the affected nozzle and filter according to its manufacturer’s instructions. Rain Bird lists both a clogged nozzle or filter and high pressure as causes of misting in its spray and nozzle troubleshooting guide. Cleaning addresses debris; pressure testing addresses a different cause.
How does high pressure affect a spray head?
EPA WaterSense explains that spray sprinklers operating above their intended pressure can produce mist, excess flow and uneven coverage. A pressure-regulating spray body controls pressure at the nozzle. See EPA’s explanation of pressure-regulated spray sprinkler bodies.
There is no single correct pressure for every spray nozzle and rotor. Identify the installed product and use its operating specifications. A replacement body needs to match the nozzle’s requirements, connection and installation depth.
Should regulation go at the head or the valve?
That depends on the measured pressure and the equipment served. Hunter describes regulation at the system connection, valve or head. A qualified diagnosis can determine which option fits the zone rather than adding several regulators without a plan.
After a correction, check the full pattern and reach. A cleaner-looking spray is useful only if the intended lawn area still receives coverage.

Manufacturer video
Watch Hunter: Pressure Regulation Product Line. Video by Hunter Landscape Irrigation. Hunter explains regulation at the supply, valve and sprinkler body. The appropriate location and pressure depend on the installed system.
Where to buy sprinkler repair parts locally
These are independent retailers, not Sprinkler Master service locations. Call the store to confirm current hours, stock and return terms before visiting.
- Sprinkler Supply Company — West Jordan
7878 S 1410 W, West Jordan, UT 84088. Official store directory. - Sprinkler Supply Company — Riverton
11654 S Redwood Rd, Riverton, UT 84095. Official store directory. - Sprinkler World — Sandy
Official Sandy store listing. Confirm the location and parts availability directly.
Identify the part before shopping
Bring a clear photo of the valve or head, its model label and the affected connection. For a valve, match the repair kit to the model; for piping, confirm material and size. Ask the supplier to check compatibility before purchasing.
Supplier listings checked October 6, 2026. Specific fitting and repair-kit stock has not been confirmed.
Let Sprinkler Master handle the problem
We can inspect the nozzle pattern, check operating pressure and evaluate compatible repair options. That can save time spent replacing nozzles repeatedly when the underlying issue is pressure, or buying regulation equipment when debris is the cause.
Call (801) 988-9671 for Sprinkler Master Repair (South Valley). Tell us your town, the affected zone and when the problem occurs. Ask about scheduling, visit charges and repair approval before work begins.
Outside this area? The Sprinkler Master location directory lists other locations with their own contact details.
Towns and communities we serve
Explore our local service pages below. Call (801) 988-9671 to confirm availability for your address.
- Cottonwood Heights, UT
- Bluffdale UT
- Draper Utah
- Herriman UT
- Holladay UT
- Kearns UT
- Magna UT
- Midvale, UT
- Millcreek UT
- Murray UT
- Riverton UT
- Sandy Utah
- South Jordan Utah
- Taylorsville UT
- West Jordan Utah
- West Valley City UT
- White City Utah
Outside Salt Lake County? Our Tooele service page has information for that area; call to confirm coverage and travel arrangements.
Diagnostic diagram: Sprinkler misting and fogging
- Observe in calm conditions → One distorted head or many fogging heads?
- One head → Turn the zone off and inspect the nozzle and filter.
- Many heads → Measure operating pressure and identify nozzle specifications.
- Confirmed excess pressure → Select compatible regulation at the appropriate location.
- Run the zone again → Confirm both the spray pattern and coverage.
